Size designations for whole and pitted styles.

  1. Law
  2. CFR 7
  3. Agriculture
  4. Regulations of the Department of Agriculture
  5. Agricultural Marketing Service (Standards, Inspections, Marketing Practices), Department of Agriculture
  6. Requirements and Standards Under the Agricultural Marketing Act of 1946 and the Egg Products Inspection Act
  7. Processed Fruits and Vegetables, Processed Products Thereof, and Certain Other Processed Food Products
  8. United States Standards for Grades of Canned Ripe Olives
  9. Product Description, Types, Styles, and Grades
  10. Size designations for whole and pitted styles.

Checkout our iOS App for a better way to browser and research.

§ 52.3754 Size designations for whole and pitted styles.

(a) General.

(1) “Average count” for canned whole ripe olives is determined from all containers in the sample and is calculated on the basis of the drained weight of the olives.

(2) Diameters of canned whole and pitted ripe olives are determined by measuring the smallest diameters at the largest circumferences at right angles to the longitudinal axes of the olives. The longitudinal axis is a line running from the stem to the apex of the olive.

(b) Size determination. Size of canned whole or pitted olives shall conform to the applicable count per pound range indicated in Table I in the case of whole olives, or conform closely to the applicable illustration in Table I in the case of pitted olives. When the count per pound of whole olives falls between two count ranges, the size designation shall be the next smaller size.

[42 FR 38585, July 29, 1977, as amended at 46 FR 39564, Aug. 4, 1981. Redesignated at 46 FR 63203, Dec. 31, 1981, and amended at 48 FR 41012, Sept. 13, 1983]


Download our app to see the most-to-date content.