Procedures for evaluating interior container defects.

  1. Law
  2. CFR 7
  3. Agriculture
  4. Regulations of the Department of Agriculture
  5. Agricultural Marketing Service (Standards, Inspections, Marketing Practices), Department of Agriculture
  6. Commodity Standards and Container Requirements
  7. Standards for Condition of Food Containers
  8. Procedures for Stationary Lot Sampling and Inspection
  9. Procedures for evaluating interior container defects.

Checkout our iOS App for a better way to browser and research.

§ 42.114 Procedures for evaluating interior container defects.

(a) Sections 42.101-42.136 provide procedures for determining lot conformance with the U.S. Standards for Condition of Food Containers. This determination is based on the examination of the external characteristics of the food containers.

(b) As an option, if a user of the inspection service requests to have the interior characteristics of containers examined, and apply these results in the determination of lot acceptability, the defects listed in Table XII may be used.

(c) The determination of lot acceptability based on internal container defects shall be independent of the determination of lot acceptability for U.S. Standards for Condition of Food Containers. A user of the inspection service may choose to require inspection for internal can defects as well as inspection for U.S. Standards for Condition of Food Containers.

(d) If a user of the inspection service requests an examination for internal container defects in addition to an official USDA/USDC inspection for product quality and/or U.S. grade, the containers opened by the official inspection service for inspection of product quality and/or U.S. grade will be used for examination of interior container defects. The minimum sample size for evaluation of interior container defects will be 13 containers. As a result, additional containers will be required if the inspection for quality or U.S. grade calls for fewer than 13 containers. Table XIII provides acceptance numbers for internal container defects for selected sample sizes.

Expand Table

Table XII - Interior Container Defects

Defects Categories
Major Minor
De-tinning in metal container materially affecting usability 101
De-tinning in metal container not materially affecting usability 201
Black spots in metal container 202
Enamel missing (when required) in metal container 102
Enamel breakdown in metal container material affecting usability 103
Enamel breakdown in metal container material not affecting usability 203
Other defect(s) of the interior of the container (metal, plastic, paper, rigid, etc.) e.g., interior damage, tear, delamination, missing layer, off-odor, interior blisters, etc. that materially affects usability 104
Defect(s) of the interior of the container (metal, plastic, paper, rigid, etc.) e.g., interior damage, tear, delamination, missing layer, off-odor, interior blisters, etc. that materially affects appearance but not usability 204
Expand Table

Table XIII - Acceptance Numbers for Internal Container Defects

Sample Size (n = number of containers) Major Total
Interior Defects Interior Defects
Ac Re Ac Re
n - 13 0 1 2 3
n - 21 1 2 3 4
n - 29 1 2 4 5
n - 38 2 3 5 6
n - 48 2 3 6 7
n - 60 2 3 7 8

[78 FR 57046, Sept. 17, 2013]


Download our app to see the most-to-date content.