The utilization goal is not a rigid and inflexible quota which must be met, nor is it to be considered either a ceiling or a floor for the employment of particular groups. Quotas are expressly forbidden.
(a) Goal. OFCCP has established a utilization goal of 7 percent for employment of qualified individuals with disabilities for each job group in the contractor's workforce, or for the contractor's entire workforce as provided in paragraph (d)(2)(i) of this section.
(b) Purpose. The purpose of the utilization goal is to establish a benchmark against which the contractor must measure the representation of individuals within each job group in its workforce, or within the contractor's entire workforce as provided in paragraph (d)(2)(i) of this section. The utilization goal serves as an equal employment opportunity objective that should be attainable by complying with all aspects of the affirmative action requirements of this part.
(c) Periodic review of goal. The Director of OFCCP shall periodically review and update, as appropriate, the utilization goal established in paragraph (a) of this section.
(d) Utilization analysis -
(1) Purpose. The utilization analysis is designed to evaluate the representation of individuals with disabilities in each job group within the contractor's workforce, or to evaluate the representation of individuals with disabilities in the contractor's entire workforce as provided in paragraph (d)(2)(i) of this section, with the utilization goal established in paragraph (a) of this section.
(2) Grouping jobs for analysis. The contractor must use the same job groups established for utilization analyses under Executive Order 11246, either in accordance with 41 CFR part 60-2, or in accordance with 41 CFR part 60-4, as appropriate, except as provided below.
(i) Contractors with 100 or fewer employees. If a contractor has a total workforce of 100 or fewer employees, it need not use the jobs groups established for utilization analyses under Executive Order 11246, and has the option to measure the representation of individuals with disabilities in its entire workforce with the utilization goal established in paragraph (a) of this section.
(ii) [Reserved]
(3) Annual evaluation. The contractor shall annually evaluate its utilization of individuals with disabilities in each job group, or in its entire workforce as provided in paragraph (d)(2)(i) of this section.
(e) Identification of problem areas. When the percentage of individuals with disabilities in one or more job groups, or in a contractor's entire workforce as provided in paragraph (d)(2)(i) of this section, is less than the utilization goal established in paragraph (a) of this section, the contractor must take steps to determine whether and where impediments to equal employment opportunity exist. When making this determination, the contractor must assess its personnel processes, the effectiveness of its outreach and recruitment efforts, the results of its affirmative action program audit, and any other areas that might affect the success of the affirmative action program.
(f) Action-oriented programs. The contractor must develop and execute action-oriented programs designed to correct any identified problems areas. These action-oriented programs may include the modification of personnel processes to ensure equal employment opportunity for individuals with disabilities, alternative or additional outreach and recruitment efforts from among those listed in § 60-741.44 (f)(1) and (f)(2), and/or other actions designed to correct the identified problem areas and attain the established goal.
(g) A contractor's determination that it has not attained the utilization goal established in paragraph (a) of this section in one or more job groups does not constitute either a finding or admission of discrimination in violation of this part.
(h) The utilization goal established in paragraph (a) of this section shall not be used as a quota or ceiling that limits or restricts the employment of individuals with disabilities.