(a) NARA incorporates certain material by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, NARA must publish a document in the Federal Register and the material must be available to the public. You may inspect all approved material incorporated by reference at NARA's textual research room, located at National Archives and Records Administration; 8601 Adelphi Road; Room 2000; College Park, MD 20740-6001. To arrange to inspect this approved material at NARA, contact NARA's Regulation Comments Desk (Strategy and Performance Division (MP)) by email at [email protected] or by telephone at 301.837.3151. All approved material is also available from the sources listed below. You may also inspect approved material at the Office of the Federal Register (OFR). For information on the availability of this material at the OFR, call 202.741.6000 or go to http://www.archives.gov/federal_register/cfr/ibr-locations.html.
(b) International Organization for Standards (ISO). The following ISO standards are available from the American National Standards Institute, 25 West 43rd St., 4th Floor, New York, NY 10036, phone number (212) 642-4900, or online at http://webstore.ansi.org.
(1) ISO/IEC 15896:1999 (“ISO/IEC 15896”), Information technology - Data interchange on 12,7 mm 208-track magnetic tape cartridges - DLT 5 format, First Edition, December 15, 1999, IBR approved for § 1235.46.
(2) ISO/IEC 16382:2000 (“ISO/IEC 16382”), Information technology - Data interchange on 12,7 mm 208-track magnetic tape cartridges - DLT 6 format, First Edition, May 15, 2000, IBR approved for § 1235.46.
(c) Document Engineering Co., Inc. The following standards are available from the standards reseller DECO - Document Engineering Co., Inc., 15210 Stagg Street, Van Nuys, CA, phone number (818) 782-1010, or online at http://www.doceng.com:
(1) ANSI X3.39-1986 (“ANSI X3.39”), American National Standard: Recorded Magnetic Tape for Information Interchange (1600 CPI, PE), 1986, IBR approved for § 1235.46.
(2) [Reserved]
(d) The following standards are not available from the original publisher or a standards reseller. To inspect the standards at a NARA location other than the NARA facility in College Park, MD, or the Office of the Federal Register, contact NARA's Regulations Comment Desk as provided in paragraph (a) of this section.
(1) ANSI X3.54-1986 (“ANSI X3.54”), American National Standard: Recorded Magnetic Tape for Information Interchange (6250 CPI, Group Coded Recording), 1986, IBR approved for § 1235.46.
(2) ANSI X3.180-1990 (“ANSI X3.180”), American National Standard: Magnetic Tape and Cartridge for Information Interchange - 18-Track, Parallel, 1⁄2 inch (12.65 mm), 37871 cpi (1491 cpmm), Group-Coded - Requirements for Recording, 1990, IBR approved for § 1235.46.
(3) ANSI/NISO/ISO 9660-1990 (“ANSI/NISO/ISO 9660”), American National Standard for Volume and File Structure of CD-ROM for Information Exchange, 1990, IBR approved for § 1235.46.
(4) ISO/IEC 15307:1997 (“ISO/IEC 15307”), Information technology - Data interchange on 12,7 mm 128-track magnetic tape cartridges - DLT 4 format, First Edition, December 1, 1997, IBR approved for § 1235.46.
[74 FR 51014, Oct. 2, 2009, as amended at 83 FR 13656, Mar. 30, 2018]