Requirements for sling carriers.

Checkout our iOS App for a better way to browser and research.

§ 1228.2 Requirements for sling carriers.

(a) Except as provided in paragraph (b) of this section, each sling carrier must comply with all applicable provisions of ASTM F2907-19, Standard Consumer Safety Specification for Sling Carriers, approved on November 1, 2019. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy of this ASTM standard from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959; USA; phone: 610-832-9585; www.astm.org. A read-only copy of the standard is available for viewing on the ASTM website at https://www.astm.org/READINGLIBRARY/. You may inspect a copy at the Division of the Secretariat, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7479, email: , or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email , or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

(b) In addition to complying with section 5.7.2 of ASTM F2907-19, comply with the following:

(1) 5.7.3 Warning labels that are attached to the fabric with seams shall remain in contact with the fabric around the entire perimeter of the label, when the sling is in all manufacturer recommended use positions.

(2) [Reserved]

[85 FR 21770, Apr. 20, 2020, as amended at 85 FR 40877, July 8, 2020]


Download our app to see the most-to-date content.