The applicant must determine the structural design loads acting on:
(a) Each engine mount and its supporting structure such that both are designed to withstand loads resulting from -
(1) Powerplant operation combined with flight gust and maneuver loads; and
(2) For non-reciprocating powerplants, sudden powerplant stoppage.
(b) Each flight control and high-lift surface, their associated system and supporting structure resulting from -
(1) The inertia of each surface and mass balance attachment;
(2) Flight gusts and maneuvers;
(3) Pilot or automated system inputs;
(4) System induced conditions, including jamming and friction; and
(5) Taxi, takeoff, and landing operations on the applicable surface, including downwind taxi and gusts occurring on the applicable surface.
(c) A pressurized cabin resulting from the pressurization differential -
(1) From zero up to the maximum relief pressure combined with gust and maneuver loads;
(2) From zero up to the maximum relief pressure combined with ground and water loads if the airplane may land with the cabin pressurized; and
(3) At the maximum relief pressure multiplied by 1.33, omitting all other loads.