(a)
(b)
(1)
(A) passenger automobiles manufactured by manufacturers in each model year beginning with model year 2011 in accordance with this subsection;
(B) non-passenger automobiles manufactured by manufacturers in each model year beginning with model year 2011 in accordance with this subsection; and
(C) work trucks and commercial medium-duty or heavy-duty on-highway vehicles in accordance with subsection (k).
(2)
(A)
(B)
(C)
(3)
(A) prescribe by regulation separate average fuel economy standards for passenger and non-passenger automobiles based on 1 or more vehicle attributes related to fuel economy and express each standard in the form of a mathematical function; and
(B) issue regulations under this title prescribing average fuel economy standards for at least 1, but not more than 5, model years.
(4)
(A) 27.5 miles per gallon; or
(B) 92 percent of the average fuel economy projected by the Secretary for the combined domestic and non-domestic passenger automobile fleets manufactured for sale in the United States by all manufacturers in the model year, which projection shall be published in the Federal Register when the standard for that model year is promulgated in accordance with this section.
(c)
(d)
(A) finds that the applicable standard under those subsections is more stringent than the maximum feasible average fuel economy level that the manufacturer can achieve; and
(B) prescribes by regulation an alternative average fuel economy standard for the passenger automobiles manufactured by the exempted manufacturer that the Secretary decides is the maximum feasible average fuel economy level for the manufacturers to which the alternative standard applies.
(2) An alternative average fuel economy standard the Secretary of Transportation prescribes under paragraph (1)(B) of this subsection may apply to an individually exempted manufacturer, to all automobiles to which this subsection applies, or to classes of passenger automobiles, as defined under regulations of the Secretary, manufactured by exempted manufacturers.
(3) Notwithstanding paragraph (1) of this subsection, an importer registered under section 30141(c) of this title may not be exempted as a manufacturer under paragraph (1) for a motor vehicle that the importer-
(A) imports; or
(B) brings into compliance with applicable motor vehicle safety standards prescribed under chapter 301 of this title for an individual under section 30142 of this title.
(4) The Secretary of Transportation may prescribe the contents of an application for an exemption.
(e)
(A) as an ambulance or combination ambulance-hearse;
(B) by the United States Government or a State or local government for law enforcement; or
(C) for other emergency uses prescribed by regulation by the Secretary of Transportation.
(2) A manufacturer may elect to have the fuel economy of an emergency vehicle excluded in applying a fuel economy standard under subsection (a), (b), (c), or (d) of this section. The election is made by providing written notice to the Secretary of Transportation and to the Administrator of the Environmental Protection Agency.
(f)
(g)
(2) When the Secretary of Transportation prescribes an amendment under this section that makes an average fuel economy standard more stringent, the Secretary shall prescribe the amendment (and submit the amendment to Congress when required under subsection (c)(2) of this section) at least 18 months before the beginning of the model year to which the amendment applies.
(h)
(1) may not consider the fuel economy of dedicated automobiles;
(2) shall consider dual fueled automobiles to be operated only on gasoline or diesel fuel; and
(3) may not consider, when prescribing a fuel economy standard, the trading, transferring, or availability of credits under section 32903.
(i)
(j)
(2) Before taking final action on a standard or an exemption from a standard under this section, the Secretary of Transportation shall notify the Secretary of Energy and provide the Secretary of Energy a reasonable time to comment.
(k)
(1)
(A) the appropriate test procedures and methodologies for measuring the fuel efficiency of such vehicles and work trucks;
(B) the appropriate metric for measuring and expressing commercial medium- and heavy-duty on-highway vehicle and work truck fuel efficiency performance, taking into consideration, among other things, the work performed by such on-highway vehicles and work trucks and types of operations in which they are used;
(C) the range of factors, including, without limitation, design, functionality, use, duty cycle, infrastructure, and total overall energy consumption and operating costs that affect commercial medium- and heavy-duty on-highway vehicle and work truck fuel efficiency; and
(D) such other factors and conditions that could have an impact on a program to improve commercial medium- and heavy-duty on-highway vehicle and work truck fuel efficiency.
(2)
(3)
(A) 4 full model years of regulatory lead-time; and
(B) 3 full model years of regulatory stability.
(
| Revised Section | Source (U.S. Code) | Source (Statutes at Large) |
|---|---|---|
| 32902(a) | 15:2002(b). | Oct. 20, 1972,
|
| 32902(b) | 15:2002(a)(1), (3). | |
| 32902(c)(1) | 15:2002(a)(4) (words before 5th comma), (h). | |
| 32902(c)(2) | 15:2002(a)(4) (words after 5th comma), (5). | |
| 32902(d) | 15:1397 (note). | Oct. 31, 1988,
|
| 15:2002(c). | ||
| 32902(e) | 15:2002(g). | Oct. 20, 1972,
|
| 32902(f) | 15:2002(e) (1st sentence). | |
| 32902(g) | 15:2002(f). | |
| 32902(h) | 15:2002(e) (last sentence). | Oct. 20, 1972,
|
| 15:2013(g)(2)(B). | ||
| 32902(i) | 15:2002(i) (1st sentence). | Oct. 20, 1972,
|
| 32902(j) | 15:2002(i) (2d, last sentences), (j). |
In subsection (a), the words "Any standard applicable to a model year under this subsection shall be prescribed" are omitted as surplus. The words "which begins more than 30 months after December 22, 1975" are omitted as executed.
In subsection (b), the text of 15:2002(a)(1) (related to model years before 1985) and (3) is omitted as expired. The words "at least" are omitted as unnecessary because of the source provisions restated in subsection (c) of this section.
In subsection (c)(1), the words "Subject to paragraph (2) of this subsection" are added for clarity. The words "may prescribe regulations amending" are substituted for "may, by rule, amend" for clarity and consistency in the revised title and because "rule" is synonymous with "regulation". The words "for a model year" are substituted for "for model year 1985, or for any subsequent model year" to eliminate the expired limitation. The reference in 15:2002(h) to 15:2002(d) is omitted because 15:2002(d) is omitted from the revised title as executed. The words "as well as written" are omitted as surplus.
In subsection (c)(2), the words "If an amendment increases the standard . . . or decreases the standard" are substituted for "except that any amendment that has the effect of increasing . . . a standard . . ., or of decreasing . . . a standard" to eliminate unnecessary words. The words "For purposes of considering any modification which is submitted to the Congress under paragraph (4)" are omitted as surplus. The words "are deemed to be" are substituted for "shall be lengthened to" for clarity and consistency.
In subsection (d)(1), before clause (A), the words "Except as provided in paragraph (3) of this subsection" are added because of the restatement. The words "in the model year 2 years before" are substituted for "in the second model year preceding" for clarity. The words "The Secretary may exempt a manufacturer only if the Secretary" are substituted for "Such exemption may only be granted if the Secretary" and "The Secretary may not issue exemptions with respect to a model year unless he" to eliminate unnecessary words. The words "each such standard shall be set at a level which" are omitted as surplus.
In subsection (d)(3), before clause (A), the words "Notwithstanding paragraph (1) of this subsection" are substituted for "Notwithstanding any provision of law authorizing exemptions from energy conservation requirements for manufacturers of fewer than 10,000 motor vehicles" to eliminate unnecessary words. In clause (B), the word "compliance" is substituted for "conformity" for consistency with chapter 301 of the revised title. The words "prescribed under chapter 301 of this title" are substituted for "Federal" for consistency in the revised title.
Subsection (d)(4) is substituted for 15:2002(c)(1) (2d sentence) to eliminate unnecessary words. The text of 15:2002(c)(2) is omitted as expired.
In subsection (e)(1)(B), the words "police or other" are omitted as unnecessary because the authority to prescribe standards includes the authority to amend those standards.
In subsection (g)(1), the words "from time to time" are omitted as unnecessary. The cross-reference to 15:2002(a)(3) is omitted as executed because 15:2002(a)(3) applied to model years 1981–1984.
In subsection (g)(2), the words "that makes" are substituted for "has the effect of making" to eliminate unnecessary words.
In subsection (i), the words "his responsibilities under" are omitted as surplus.
In subsection (j), the reference to 15:2002(d) and the words "or any modification of" are omitted because 15:2002(d) is omitted from the revised title as executed.
In subsection (j)(1), the words "to prescribe or amend" are substituted for "to establish, reduce, or amend" to eliminate unnecessary words. The words "adverse impact" are substituted for "level" for clarity and consistency. The words "those comments" are substituted for "unaccommodated comments" for clarity.
Section 108 of the Ten-in-Ten Fuel Economy Act, referred to in subsec. (k)(1), is section 108 of
2007-Subsec. (a).
Subsec. (b).
Subsec. (c).
Subsec. (h)(3).
Subsec. (k).
Amendment by
"(a)
"(1) an assessment of automotive technologies and costs to reflect developments since the Academy's 2002 report evaluating the corporate average fuel economy standards was conducted;
"(2) an analysis of existing and potential technologies that may be used practically to improve automobile and medium-duty and heavy-duty truck fuel economy;
"(3) an analysis of how such technologies may be practically integrated into the automotive and medium-duty and heavy-duty truck manufacturing process; and
"(4) an assessment of how such technologies may be used to meet the new fuel economy standards under chapter 329 of title 49, United States Code, as amended by this subtitle [subtitle A (§§101–113) of title I of
"(b)
"(c)
Memorandum of President of the United States, Jan. 26, 2009, 74 F.R. 4907, provided:
Memorandum for the Secretary of Transportation [and] the Administrator of the National Highway Traffic Safety Administration
In 2007, the Congress passed the Energy Independence and Security Act (EISA). This law mandates that, as part of the Nation's efforts to achieve energy independence, the Secretary of Transportation prescribe annual fuel economy increases for automobiles, beginning with model year 2011, resulting in a combined fuel economy fleet average of at least 35 miles per gallon by model year 2020. On May 2, 2008, the National Highway Traffic Safety Administration (NHTSA) published a Notice of Proposed Rulemaking entitled Average Fuel Economy Standards, Passenger Cars and Light Trucks; Model Years 2011–2015, 73 Fed. Reg. 24352. In the notice and comment period, the NHTSA received numerous comments, some of them contending that certain aspects of the proposed rule, including appendices providing for preemption of State laws, were inconsistent with provisions of EISA and the Supreme Court's decision in Massachusetts v. Environmental Protection Agency, 549 U.S. 497 (2007).
Federal law requires that the final rule regarding fuel economy standards be adopted at least 18 months before the beginning of the model year (49 U.S.C. 32902(g)(2)). In order for the model year 2011 standards to meet this requirement, the NHTSA must publish the final rule in the Federal Register by March 30, 2009. To date, the NHTSA has not published a final rule.
Therefore, I request that:
(a) in order to comply with the EISA requirement that fuel economy increases begin with model year 2011, you take all measures consistent with law, and in coordination with the Environmental Protection Agency, to publish in the Federal Register by March 30, 2009, a final rule prescribing increased fuel economy for model year 2011;
(b) before promulgating a final rule concerning model years after model year 2011, you consider the appropriate legal factors under the EISA, the comments filed in response to the Notice of Proposed Rulemaking, the relevant technological and scientific considerations, and to the extent feasible, the forthcoming report by the National Academy of Sciences mandated under section 107 of EISA; and
(c) in adopting the final rules in paragraphs (a) and (b) above, you consider whether any provisions regarding preemption are consistent with the EISA, the Supreme Court's decision in Massachusetts v. EPA and other relevant provisions of law and the policies underlying them.
This memorandum is not intended to, and does not, create any right or benefit, substantive or procedural, enforceable at law or in equity by any party against the United States, its departments, agencies, or entities, its officers, employees, or agents, or any other person.
The Secretary of Transportation is hereby authorized and directed to publish this memorandum in the Federal Register.
Barack Obama.
Memorandum of President of the United States, May 21, 2010, 75 F.R. 29399, provided:
Memorandum for the Secretary of Transportation[,] the Secretary of Energy[,] the Administrator of the Environmental Protection Agency[, and] the Administrator of the National Highway Traffic Safety Administration
America has the opportunity to lead the world in the development of a new generation of clean cars and trucks through innovative technologies and manufacturing that will spur economic growth and create high-quality domestic jobs, enhance our energy security, and improve our environment. We already have made significant strides toward reducing greenhouse gas pollution and enhancing fuel efficiency from motor vehicles with the joint rulemaking issued by the National Highway Traffic Safety Administration (NHTSA) and the Environmental Protection Agency (EPA) on April 1, 2010, which regulates these attributes of passenger cars and light-duty trucks for model years 2012–2016. In this memorandum, I request that additional coordinated steps be taken to produce a new generation of clean vehicles.
While the Federal Government and many States have now created a harmonized framework for addressing the fuel economy of and greenhouse gas emissions from cars and light-duty trucks, medium- and heavy-duty trucks and buses continue to be a major source of fossil fuel consumption and greenhouse gas pollution. I therefore request that the Administrators of the EPA and the NHTSA immediately begin work on a joint rulemaking under the Clean Air Act (CAA) and the Energy Independence and Security Act of 2007 (EISA) to establish fuel efficiency and greenhouse gas emissions standards for commercial medium- and heavy-duty vehicles beginning with model year 2014, with the aim of issuing a final rule by July 30, 2011. As part of this rule development process, I request that the Administrators of the EPA and the NHTSA:
(a) Propose and take comment on strategies, including those designed to increase the use of existing technologies, to achieve substantial annual progress in reducing transportation sector emissions and fossil fuel consumption consistent with my Administration's overall energy and climate security goals. These strategies should consider whether particular segments of the diverse heavy-duty vehicle sector present special opportunities to reduce greenhouse gas emissions and increase fuel economy. For example, preliminary estimates indicate that large tractor trailers, representing half of all greenhouse gas emissions from this sector, can reduce greenhouse gas emissions by as much as 20 percent and increase their fuel efficiency by as much as 25 percent with the use of existing technologies;
(b) Include fuel efficiency and greenhouse gas emissions standards that take into account the market structure of the trucking industry and the unique demands of heavy-duty vehicle applications; seek harmonization with applicable State standards; consider the findings and recommendations published in the National Academy of Science report on medium- and heavy-duty truck regulation; strengthen the industry and enhance job creation in the United States; and
(c) Seek input from all stakeholders, while recognizing the continued leadership role of California and other States.
Building on the earlier joint rulemaking, and in order to provide greater certainty and incentives for long-term innovation by automobile and light-duty vehicle manufacturers, I request that the Administrators of the EPA and the NHTSA develop, through notice and comment rulemaking, a coordinated national program under the CAA and the EISA to improve fuel efficiency and to reduce greenhouse gas emissions of passenger cars and light-duty trucks of model years 2017–2025. The national program should seek to produce joint Federal standards that are harmonized with applicable State standards, with the goal of ensuring that automobile manufacturers will be able to build a single, light-duty national fleet. The program should also seek to achieve substantial annual progress in reducing transportation sector greenhouse gas emissions and fossil fuel consumption, consistent with my Administration's overall energy and climate security goals, through the increased domestic production and use of existing, advanced, and emerging technologies, and should strengthen the industry and enhance job creation in the United States. As part of implementing the national program, I request that the Administrators of the EPA and the NHTSA:
(a) Work with the State of California to develop by September 1, 2010, a technical assessment to inform the rulemaking process, reflecting input from an array of stakeholders on relevant factors, including viable technologies, costs, benefits, lead time to develop and deploy new and emerging technologies, incentives and other flexibilities to encourage development and deployment of new and emerging technologies, impacts on jobs and the automotive manufacturing base in the United States, and infrastructure for advanced vehicle technologies; and
(b) Take all measures consistent with law to issue by September 30, 2010, a Notice of Intent to Issue a Proposed Rule that announces plans for setting stringent fuel economy and greenhouse gas emissions standards for light-duty vehicles of model year 2017 and beyond, including plans for initiating joint rulemaking and gathering any additional information needed to support regulatory action. The Notice should describe the key elements of the program that the EPA and the NHTSA intend jointly to propose, under their respective statutory authorities, including potential standards that could be practicably implemented nationally for the 2017–2025 model years and a schedule for setting those standards as expeditiously as possible, consistent with providing sufficient lead time to vehicle manufacturers.
The success of our efforts to achieve enhanced energy security and to protect the environment also depends upon the development of infrastructure and promotion of fuels, including biofuels, which will enable the development and widespread deployment of advanced technologies. Therefore, I further request that:
(a) The Administrator of the EPA review for adequacy the current nongreenhouse gas emissions regulations for new motor vehicles, new motor vehicle engines, and motor vehicle fuels, including tailpipe emissions standards for nitrogen oxides and air toxics, and sulfur standards for gasoline. If the Administrator of the EPA finds that new emissions regulations are required, then I request that the Administrator of the EPA promulgate such regulations as part of a comprehensive approach toward regulating motor vehicles; and [sic]
(b) The Secretary of Energy promote the deployment of advanced technology vehicles by providing technical assistance to cities preparing for deployment of electric vehicles, including plug-in hybrids and all-electric vehicles; and
(c) The Department of Energy work with stakeholders on the development of voluntary standards to facilitate the robust deployment of advanced vehicle technologies and coordinate its efforts with the Department of Transportation, the NHTSA, and the EPA.
(a) This memorandum shall be implemented consistent with applicable law, including international trade obligations, and subject to the availability of appropriations.
(b) This memorandum is not intended to, and does not, create any right or benefit, substantive or procedural, enforceable at law or in equity by any party against the United States, its departments, agencies, or entities, its officers, employees, or agents, or any other person.
(c) Nothing in this memorandum shall be construed to impair or otherwise affect:
(1) authority granted by law to a department, agency, or the head thereof; or
(2) functions of the Director of the Office of Management and Budget relating to budgetary, administrative, or legislative proposals.
The Secretary of Transportation is hereby authorized and directed to publish this memorandum in the Federal Register.
Barack Obama.