Hollings Manufacturing Extension Partnership

Checkout our iOS App for a better way to browser and research.

§278k. Hollings Manufacturing Extension Partnership

(a) Definitions

In this section:

(1) Appropriate committees of congress

The term "appropriate committees of Congress" means-

(A) the Committee on Commerce, Science, and Transportation of the Senate; and

(B) the Committee on Science, Space, and Technology of the House of Representatives.

(2) Area career and technical education school

The term "area career and technical education school" has the meaning given the term in section 2302 of title 20.

(3) Center

The term "Center" means a manufacturing extension center that-

(A) is created under subsection (b); and

(B) is affiliated with an eligible entity that applies for and is awarded financial support under subsection (e).

(4) Community college

The term "community college" means an institution of higher education (as defined under section 1001(a) of title 20) at which the highest degree that is predominately awarded to students is an associate's degree.

(5) Eligible entity

The term "eligible entity" means a United States-based nonprofit institution, or consortium thereof, an institution of higher education, or a State, United States territory, local, or tribal government.

(6) Hollings Manufacturing Extension Partnership or Program

The term "Hollings Manufacturing Extension Partnership" or "Program" means the program established under subsection (b).

(7) MEP advisory board

The term "MEP Advisory Board" means the Manufacturing Extension Partnership Advisory Board established under subsection (n).1

(b) Establishment and purpose

The Secretary, acting through the Director and, if appropriate, through other Federal officials, shall establish a program to provide assistance for the creation and support of manufacturing extension centers for the transfer of manufacturing technology and best business practices.

(c) Objective

The objective of the Program shall be to enhance competitiveness, productivity, and technological performance in United States manufacturing through-

(1) the transfer of manufacturing technology and techniques developed at the Institute to Centers and, through them, to manufacturing companies throughout the United States;

(2) the participation of individuals from industry, institutions of higher education, State governments, other Federal agencies, and, when appropriate, the Institute in cooperative technology transfer activities;

(3) efforts to make new manufacturing technology and processes usable by United States-based small and medium-sized companies;

(4) the active dissemination of scientific, engineering, technical, and management information about manufacturing to industrial firms, including small and medium-sized manufacturing companies;

(5) the utilization, when appropriate, of the expertise and capability that exists in Federal agencies, other than the Institute, and federally-sponsored laboratories;

(6) the provision to community colleges and area career and technical education schools of information about the job skills needed in manufacturing companies, including small and medium-sized manufacturing businesses in the regions they serve;

(7) the promotion and expansion of certification systems offered through industry, associations, and local colleges when appropriate, including efforts such as facilitating training, supporting new or existing apprenticeships, and providing access to information and experts, to address workforce needs and skills gaps in order to assist small- and medium-sized manufacturing businesses; and

(8) the growth in employment and wages at United States-based small and medium-sized companies.

(d) Activities

The activities of a Center shall include-

(1) the establishment of automated manufacturing systems and other advanced production technologies, based on Institute-supported research, for the purpose of demonstrations and technology transfer;

(2) the active transfer and dissemination of research findings and Center expertise to a wide range of companies and enterprises, particularly small and medium-sized manufacturers; and

(3) the facilitation of collaborations and partnerships between small and medium-sized manufacturing companies, community colleges, and area career and technical education schools, to help those entities better understand the specific needs of manufacturers and to help manufacturers better understand the skill sets that students learn in the programs offered by such colleges and schools.

(e) Financial assistance

(1) Authorization

Except as provided in paragraph (2), the Secretary may provide financial assistance for the creation and support of a Center through a cooperative agreement with an eligible entity.

(2) Cost sharing

The Secretary may not provide more than 50 percent of the capital and annual operating and maintenance funds required to establish and support a Center.

(3) Rule of construction

For purposes of paragraph (2), any amount received by an eligible entity for a Center under a provision of law other than paragraph (1) shall not be considered an amount provided under paragraph (1).

(4) Regulations

The Secretary may revise or promulgate such regulations as necessary to carry out this subsection.

(f) Applications

(1) In general

An eligible entity shall submit an application to the Secretary at such time, in such manner, and containing such information as the Secretary may require.

(2) Program description

The Secretary shall establish and update, as necessary-

(A) a description of the Program;

(B) the application procedures;

(C) performance metrics;

(D) criteria for determining qualified applicants; and 2

(E) criteria for choosing recipients of financial assistance from among the qualified applicants.2

(F) procedures for determining allowable cost share contributions; and

(G) such other program policy objectives and operational procedures as the Secretary considers necessary.

(3) Cost sharing

(A) In general

To be considered for financial assistance under this section, an applicant shall provide adequate assurances that the applicant and if applicable, the applicant's partnering organizations, will obtain funding for not less than 50 percent of the capital and annual operating and maintenance funds required to establish and support the Center from sources other than the financial assistance provided under subsection (e).

(B) Agreements with other entities

In meeting the cost-sharing requirement under subparagraph (A), an eligible entity may enter into an agreement with 1 or more other entities, such as a private industry, institutions of higher education, or a State, United States territory, local, or tribal government for the contribution by that other entity of funding if the Secretary determines the agreement-

(i) is programmatically reasonable;

(ii) will help accomplish programmatic objectives; and

(iii) is allocable under Program procedures under subsection (f)(2).

(4) Legal rights

Each applicant shall include in the application a proposal for the allocation of the legal rights associated with any intellectual property which may result from the activities of the Center.

(5) Merit review of applications

(A) In general

The Secretary shall subject each application to merit review.

(B) Considerations

In making a decision whether to approve an application and provide financial assistance under subsection (e), the Secretary shall consider, at a minimum-

(i) the merits of the application, particularly those portions of the application regarding technology transfer, training and education, and adaptation of manufacturing technologies to the needs of particular industrial sectors;

(ii) the quality of service to be provided;

(iii) the geographical diversity and extent of the service area; and

(iv) the type and percentage of funding and in-kind commitment from other sources under paragraph (3).

(g) Evaluations

(1) Third and eighth year evaluations by panel

(A) In general

The Secretary shall ensure that each Center is evaluated during its third and eighth years of operation by an evaluation panel appointed by the Secretary.

(B) Composition

The Secretary shall ensure that each evaluation panel appointed under subparagraph (A) is composed of-

(i) private experts, none of whom are connected with the Center evaluated by the panel; and

(ii) Federal officials.

(C) Chairperson

For each evaluation panel appointed under subparagraph (B), the Secretary shall appoint a chairperson who is an official of the Institute.

(2) Fifth year evaluations by Secretary

In the fifth year of operation of a Center, the Secretary shall conduct a review of the Center.

(3) Performance measurement

In evaluating a Center an evaluation panel or the Secretary, as applicable, shall measure the performance of the Center against-

(A) the objective specified in subsection (c);

(B) the performance metrics under subsection (f)(2)(C); and

(C) such other criterion as considered appropriate by the Secretary.

(4) Positive evaluations

If an evaluation of a Center is positive, the Secretary may continue to provide financial assistance for the Center-

(A) in the case of an evaluation occurring in the third year of a Center, through the fifth year of the Center;

(B) in the case of an evaluation occurring in the fifth year of a Center, through the eighth year of the Center; and

(C) in the case of an evaluation occurring in the eighth year of a Center, through the tenth year of the Center.

(5) Other than positive evaluations

(A) Probation

If an evaluation of a Center is other than positive, the Secretary shall put the Center on probation during the period beginning on the date that the Center receives notice under subparagraph (B)(i) and ending on the date that the reevaluation is complete under subparagraph (B)(iii).

(B) Notice and reevaluation

If a Center receives an evaluation that is other than positive, the evaluation panel or Secretary, as applicable, shall-

(i) notify the Center of the reason, including any deficiencies in the performance of the Center identified during the evaluation;

(ii) assist the Center in remedying the deficiencies by providing the Center, not less frequently than once every 3 months, an analysis of the Center, if considered appropriate by the panel or Secretary, as applicable; and

(iii) reevaluate the Center not later than 1 year after the date of the notice under clause (i).

(C) Continued support during period of probation

(i) In general

The Secretary may continue to provide financial assistance under subsection (e) for a Center during the probation period.

(ii) Post probation

After the period of probation, the Secretary shall not provide any financial assistance unless the Center has received a positive evaluation under subparagraph (B)(iii).

(6) Failure to remedy

(A) In general

If a Center fails to remedy a deficiency or to show significant improvement in performance before the end of the probation period under paragraph (5), the Secretary shall conduct a competition to select an operator for the Center under subsection (h).

(B) Treatment of Centers subject to new competition

Upon the selection of an operator for a Center under subsection (h), the Center shall be considered a new Center and the calculation of the years of operation of that Center for purposes of paragraphs (1) through (5) of this subsection and subsection (h)(1) shall start anew.

(h) Reapplication competition for financial assistance after 10 years

(1) In general

If an eligible entity has operated a Center under this section for a period of 10 consecutive years, the Secretary shall conduct a competition to select an eligible entity to operate the Center in accordance with the process plan under subsection (i).

(2) Incumbent eligible entities

An eligible entity that has received financial assistance under this section for a period of 10 consecutive years and that the Secretary determines is in good standing shall be eligible to compete in the competition under paragraph (1).

(3) Treatment of Centers subject to reapplication competition

Upon the selection of an operator for a Center under paragraph (1), the Center shall be considered a new Center and the calculation of the years of operation of that Center for purposes of paragraphs (1) through (5) of subsection (g) shall start anew.

(i) Process plan

Not later than 180 days after January 6, 2017, the Secretary shall implement and submit to Congress a plan for how the Institute will conduct an evaluation, competition, and reapplication competition under this section.

(j) Operational requirements

(1) Protection of confidential information of Center clients

The following information, if obtained by the Federal Government in connection with an activity of a Center or the Program, shall be exempt from public disclosure under section 552 of title 5:

(A) Information on the business operation of any participant in the Program or of a client of a Center.

(B) Trade secrets of any client of a Center.

(k) Oversight boards

(1) In general

As a condition on receipt of financial assistance for a Center under subsection (e), an eligible entity shall establish a board to oversee the operations of the Center.

(2) Standards

(A) In general

The Director shall establish appropriate standards for each board described under paragraph (1).

(B) Considerations

In establishing the standards, the Director shall take into account the type and organizational structure of an eligible entity.

(C) Requirements

The standards shall address-

(i) membership;

(ii) composition;

(iii) term limits;

(iv) conflicts of interest; and

(v) such other requirements as the Director considers necessary.

(3) Membership

(A) In general

Each board established under paragraph (1) shall be composed of members as follows:

(i) The membership of each board shall be representative of stakeholders in the region in which the Center is located.

(ii) A majority of the members of the board shall be selected from among individuals who own or are employed by small or medium-sized manufacturers.

(B) Limitation

A member of a board established under paragraph (1) may not serve on more than 1 board established under that paragraph.

(4) Bylaws

(A) In general

Each board established under paragraph (1) shall adopt and submit to the Director bylaws to govern the operation of the board.

(B) Conflicts of interest

Bylaws adopted under subparagraph (A) shall include policies to minimize conflicts of interest, including such policies relating to disclosure of relationships and recusal as may be necessary to minimize conflicts of interest.

(l) Acceptance of funds

In addition to such sums as may be appropriated to the Secretary and Director to operate the Program, the Secretary and Director may also accept funds from other Federal departments and agencies and from the private sector under section 272(c)(7) of this title, to be available to the extent provided by appropriations Acts, for the purpose of strengthening United States manufacturing.

(m) MEP Advisory Board

(1) Establishment

There is established within the Institute a Manufacturing Extension Partnership Advisory Board.

(2) Membership

(A) Composition

(i) In general

The MEP Advisory Board shall consist of not fewer than 10 members appointed by the Director and broadly representative of stakeholders.

(ii) Requirements

Of the members appointed under clause (i)-

(I) at least 2 members shall be employed by or on an advisory board for a Center;

(II) at least 5 members shall be from United States small businesses in the manufacturing sector; and

(III) at least 1 member shall represent a community college.

(iii) Limitation

No member of the MEP Advisory Board shall be an employee of the Federal Government.

(B) Term

Except as provided in subparagraph (C), the term of office of each member of the MEP Advisory Board shall be 3 years.

(C) Vacancies

Any member appointed to fill a vacancy occurring prior to the expiration of the term for which his predecessor was appointed shall be appointed for the remainder of such term.

(D) Serving consecutive terms

Any person who has completed 2 consecutive full terms of service on the MEP Advisory Board shall thereafter be ineligible for appointment during the 1-year period following the expiration of the second such term.

(3) Meetings

The MEP Advisory Board shall-

(A) meet not less than biannually; and

(B) provide to the Director-

(i) advice on the activities, plans, and policies of the Program;

(ii) assessments of the soundness of the plans and strategies of the Program; and

(iii) assessments of current performance against the plans of the Program.

(4) FACA applicability

(A) In general

In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act (5 U.S.C. App.).

(B) Exception

Section 14 of the Federal Advisory Committee Act shall not apply to the MEP Advisory Board.

(5) Annual report

(A) In general

At a minimum, the MEP Advisory Board shall transmit an annual report to the Secretary for transmittal to Congress not later than 30 days after the submission to Congress of the President's annual budget under section 1105 of title 31.

(B) Contents

The report shall address the status of the Program and describe the relevant sections of the programmatic planning document and updates thereto transmitted to Congress by the Director under subsections (c) and (d) of section 278i 3 of this title.

(n) Small manufacturers

(1) Evaluation of obstacles

As part of the Program, the Director shall-

(A) identify obstacles that prevent small manufacturers from effectively competing in the global market;

(B) implement a comprehensive plan to train the Centers to address the obstacles identified in paragraph (2); and

(C) facilitate improved communication between the Centers to assist such manufacturers in implementing appropriate, targeted solutions to the obstacles identified in paragraph (2).

(2) Development of open access resources

As part of the Program, the Secretary shall develop open access resources that address best practices related to inventory sourcing, supply chain management, manufacturing techniques, available Federal resources, and other topics to further the competitiveness and profitability of small manufacturers.

(Mar. 3, 1901, ch. 872, §25, as added Pub. L. 100–418, title V, §5121(a), Aug. 23, 1988, 102 Stat. 1433 ; amended Pub. L. 102–245, title I, §105(e), Feb. 14, 1992, 106 Stat. 12 ; Pub. L. 105–309, §2, Oct. 30, 1998, 112 Stat. 2935 ; Pub. L. 110–69, title III, §3003, Aug. 9, 2007, 121 Stat. 587 ; Pub. L. 111–240, title IV, §4226(a), Sept. 27, 2010, 124 Stat. 2598 ; Pub. L. 111–358, title IV, §404(a)–(f)(1), (3), (h), (i), title VII, §703, Jan. 4, 2011, 124 Stat. 4001–4003 , 4042; Pub. L. 114–329, title V, §501(b), Jan. 6, 2017, 130 Stat. 3023 .)

References in Text

The Federal Advisory Committee Act, referred to in subsec. (m)(4), is Pub. L. 92–463, Oct. 6, 1972, 86 Stat. 770 , which is set out in the Appendix to Title 5, Government Organization and Employees.

Subsections (c) and (d) of section 278i of this title, referred to in subsec. (m)(5)(B), which related to 3-year programmatic planning documents and annual updates, were repealed by Pub. L. 114–329, title II, §204(a)(1)(B)(i), Jan. 6, 2017, 130 Stat. 2998 .

Amendments

2017-Pub. L. 114–329 amended section generally. Prior to amendment, section related to establishment of regional centers for the transfer of manufacturing technology, the MEP Advisory Board, a competitive grant program, and an innovative services initiative.

2011-Subsec. (a). Pub. L. 111–358, §404(f)(3)(A), substituted "regional centers for the transfer of manufacturing technology" for "Regional Centers for the Transfer of Manufacturing Technology" in introductory provisions.

Subsec. (a)(6). Pub. L. 111–358, §404(a), added par. (6).

Subsec. (c)(7), (8). Pub. L. 111–358, §404(d), added pars. (7) and (8).

Subsec. (e)(4). Pub. L. 111–358, §404(e), amended par. (4) generally. Prior to amendment, text read as follows: "In discharging its duties under this subsection, the MEP Advisory Board shall function solely in an advisory capacity, in accordance with the Federal Advisory Committee Act."

Subsec. (f)(3). Pub. L. 111–358, §703(a), substituted "to add capabilities to the MEP program, including the development of" for "to develop" and "Centers may be reimbursed for costs incurred under the program. These themes-" for "These themes shall be related to projects associated with manufacturing extension activities, including supply chain integration and quality management, and including the transfer of technology based on the technological needs of manufacturers and available technologies from institutions of higher education, laboratories, and other technology producing entities, or extend beyond these traditional areas." and added subpars. (A) to (C).

Pub. L. 111–358, §404(i), substituted "Director of the Hollings MEP program," for "Director of the Centers program,".

Subsec. (f)(5). Pub. L. 111–358, §703(b), amended par. (5) generally. Prior to amendment, text read as follows: "Awards under this subsection shall be peer reviewed and competitively awarded. The Director shall select proposals to receive awards-

"(A) that utilize innovative or collaborative approaches to solving the problem described in the competition;

"(B) that will improve the competitiveness of industries in the region in which the Center or Centers are located; and

"(C) that will contribute to the long-term economic stability of that region."

Subsec. (f)(7). Pub. L. 111–358, §703(c), added par. (7) relating to duration.

Subsec. (f)(8), (9). Pub. L. 111–358, §703(c), added pars. (8) and (9).

Subsec. (g). Pub. L. 111–358, §404(b), added subsec. (g).

Subsec. (h). Pub. L. 111–358, §404(c), added subsec. (h).

Subsec. (i). Pub. L. 111–358, §404(f)(1), added subsec. (i).

Subsec. (j). Pub. L. 111–358, §404(f)(3)(B), added subsec. (j).

Subsec. (k). Pub. L. 111–358, §404(h), added subsec. (k).

2010-Subsec. (f)(7). Pub. L. 111–240 added par. (7) relating to global marketplace projects.

2007-Subsec. (c)(3). Pub. L. 110–69, §3003(a), amended par. (3) generally. Prior to amendment, par. (3) read as follows: "Any nonprofit institution, or group thereof, or consortia of nonprofit institutions, including entities existing on August 23, 1988, may submit to the Secretary an application for financial support under this subsection, in accordance with the procedures established by the Secretary and published in the Federal Register under paragraph (2). In order to receive assistance under this section, an applicant shall provide adequate assurances that it will contribute 50 percent or more of the proposed Center's capital and annual operating and maintenance costs for the first three years and an increasing share for each of the last three years. Each applicant shall also submit a proposal for the allocation of the legal rights associated with any invention which may result from the proposed Center's activities."

Subsec. (c)(5). Pub. L. 110–69, §3003(b), inserted "A Center that has not received a positive evaluation by the evaluation panel shall be notified by the panel of the deficiencies in its performance and shall be placed on probation for one year, after which time the panel shall reevaluate the Center. If the Center has not addressed the deficiencies identified by the panel, or shown a significant improvement in its performance, the Director shall conduct a new competition to select an operator for the Center or may close the Center." after "at declining levels."

Subsec. (d). Pub. L. 110–69, §3003(c), added subsec. (d) and struck out former subsec. (d). Text of former subsec. (d) read as follows: "In addition to such sums as may be authorized and appropriated to the Secretary and Director to operate the Centers program, the Secretary and Director also may accept funds from other Federal departments and agencies for the purpose of providing Federal funds to support Centers. Any Center which is supported with funds which originally came from other Federal departments and agencies shall be selected and operated according to the provisions of this section."

Subsec. (e). Pub. L. 110–69, §3003(d), added subsec. (e).

Subsec. (f). Pub. L. 110–69, §3003(e), added subsec. (f).

1998-Subsec. (c)(5). Pub. L. 105–309 substituted ". After the sixth year, a Center may receive additional financial support under this section if it has received a positive evaluation through an independent review, under procedures established by the Institute. Such an independent review shall be required at least every two years after the sixth year of operation. Funding received for a fiscal year under this section after the sixth year of operation shall not exceed one third of the capital and annual operating and maintenance costs of the Center under the program." for ", which are designed to ensure that the Center no longer needs financial support from the Institute by the seventh year. In no event shall funding for a Center be provided by the Department of Commerce after the sixth year of the operation of a Center."

1992-Subsec. (c)(6). Pub. L. 102–245, §105(e)(1), inserted before period at end "except for contracts for such specific technology extension or transfer services as may be specified by statute or by the Director".

Subsec. (d). Pub. L. 102–245, §105(e)(2), amended subsec. (d) generally. Prior to amendment, subsec. (d) read as follows: "There are authorized to be appropriated for the purposes of carrying out this section, a combined total of not to exceed $40,000,000 for fiscal years 1989 and 1990. Such sums shall remain available until expended."

Change of Name

Pub. L. 108–447, div. B, title II, Dec. 8, 2004, 118 Stat. 2879 , which in part renamed the Manufacturing Extension Partnership Program authorized under this section as the Hollings Manufacturing Partnership Program and which named the centers established and receiving funding under former subsec. (a) of this section the Hollings Manufacturing Extension Centers, was repealed by Pub. L. 111–358, title IV, §404(f)(2), Jan. 4, 2011, 124 Stat. 4002 .

Savings Provisions

Pub. L. 114–329, title V, §501(f), Jan. 6, 2017, 130 Stat. 3033 , provided that: "Notwithstanding the amendments made by subsections (a) [sic; subsec. (a) is set out as a Short Title of 2017 Amendment note under section 271 of this title] and (b) of this section [amending this section], the Secretary of Commerce may carry out section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) as that section was in effect on the day before the date of enactment of this Act [Jan. 6, 2017], with respect to existing grants, agreements, cooperative agreements, or contracts, and with respect to applications for such items that are received by the Secretary prior to the date of enactment of this Act."

Patent Rights

Pub. L. 114–329, title V, §501(g), Jan. 6, 2017, 130 Stat. 3033 , provided that: "The provisions of chapter 18 of title 35, United States Code, shall apply, to the extent not inconsistent with section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) and section 25 [sic] of that Act, to the promotion of technology from research by Centers under those sections, except for contracts for such specific technology extension or transfer services as may be specified by the Director of NIST [National Institute of Standards and Technology] or under other law."

Findings

Pub. L. 111–358, title VII, §702, Jan. 4, 2011, 124 Stat. 4041 , provided that: "Congress finds the following:

"(1) Over its 20-year existence, the Hollings Manufacturing Extension Partnership has proven its value to manufacturers as demonstrated by the resulting impact on jobs and the economies of all 50 States and the Nation as a whole.

"(2) The Hollings Manufacturing Extension Partnership has helped thousands of companies reinvest in themselves through process improvement and business growth initiatives leading to more sales, new markets, and the adoption of technology to deliver new products and services.

"(3) Manufacturing is an increasingly important part of the construction sector as the industry moves to the use of more components and factory built sub-assemblies.

"(4) Construction practices must become more efficient and precise if the United States is to construct and renovate its building stock to reduce related carbon emissions to levels that are consistent with combating global warming.

"(5) Many companies involved in construction are small, without access to innovative manufacturing techniques, and could benefit from the type of training and business analysis activities that the Hollings Manufacturing Extension Partnership routinely provides to the Nation's manufacturers and their supply chains.

"(6) Broadening the competitiveness grant program under [former] section 25(f) of the National Institute of Standards and Technology Act ([former] 15 U.S.C. 278k(f), now see 15 U.S.C. 278k–1) could help develop and diffuse knowledge necessary to capture a large portion of the estimated $100 billion or more in energy savings if buildings in the United States met the level and quality of energy efficiency now found in buildings in certain other countries.

"(7) It is therefore in the national interest to expand the capabilities of the Hollings Manufacturing Extension Partnership to be supportive of the construction and green energy industries."

Agreements and Contributions for Collective Research and Development Initiatives

Pub. L. 108–7, div. B, title II, Feb. 20, 2003, 117 Stat. 73 , provided in part: "That hereafter the Secretary of Commerce is authorized to enter into agreements with one or more nonprofit organizations for the purpose of carrying out collective research and development initiatives pertaining to [former] 15 U.S.C. 278k paragraph (a), and is authorized to seek and accept contributions from public and private sources to support these efforts as necessary."

Similar provisions were contained in the following prior appropriation act:

Pub. L. 107–77, title II, Nov. 28, 2001, 115 Stat. 774 .

Additional Renewal of Federal Financial Assistance for Centers

Pub. L. 105–277, div. A, §101(b) [title II], Oct. 21, 1998, 112 Stat. 2681–50 , 2681-83, which provided that Federal financial assistance awarded by the Secretary of Commerce to a Regional Center for the Transfer of Manufacturing Technology could continue beyond six years and could be renewed for additional periods, not to exceed one year, at a rate not to exceed one-third of the Center's total annual costs or the level of funding in the sixth year, whichever was less, subject before any such renewal to a positive evaluation of the Center and to a finding by the Secretary of Commerce that continuation of Federal funding to the Center was in the best interest of the Regional Centers for the Transfer of Manufacturing Technology Program, was from the Departments of Commerce Justice, and State, the Judiciary, and Related Agencies Appropriations Act, 1999, and was not repeated in subsequent appropriations Acts. Similar provisions were contained in the following prior appropriation acts:

Pub. L. 105–119, title II, Nov. 26, 1997, 111 Stat. 2476 .

Pub. L. 104–208, div. A, title I, §101(a) [title II], Sept. 30, 1996, 110 Stat. 3009 , 3009-36.

Pub. L. 103–317, title II, Aug. 26, 1994, 108 Stat. 1741 .

Publication in Federal Register

Pub. L. 100–519, title I, §102(d), Oct. 24, 1988, 102 Stat. 2590 , provided that the requirement of former subsec. (c)(2) of this section was met by the publication made by the National Bureau of Standards on July 18, 1988, at 53 F.R. 27060.

1 So in original. Probably should refer to subsec. (m).

2 So in original.

3 See References in Text note below.


Download our app to see the most-to-date content.