41-3-308. Alterations or repairs of dams or diversion systems; plans and specifications; duties of state engineer.
(a) Plans and specifications of any proposed construction, enlargement, major repair, alteration or removal of a dam or diversion system shall be prepared by or under the direction of a registered professional engineer licensed to practice in the state of Wyoming and experienced in dam design and construction, and shall be submitted to the state engineer for approval. It is unlawful to commence construction, enlargement, major repair, alteration or removal until the plans and specifications have been approved by the state engineer. At the request of the state engineer, the professional engineer responsible for the plans and specifications shall carry out any revisions of the plans and specifications or provide such additional information as is necessary to justify or clarify the design.
(b) A copy of all plans and specifications submitted under this section shall be kept on file in the state engineer's office.
(c) In the event that a proposed dam or diversion system is related to a facility which requires an industrial siting permit pursuant to W.S. 35-12-106:
(i) The plans and specifications of the proposed dam or diversion system shall be submitted to the state engineer at the same time that the application for an industrial siting permit is submitted to the industrial siting administration [industrial siting council] pursuant to W.S. 35-12-108;
(ii) The state engineer shall approve or reject the plans and specifications of the proposed dam or diversion system prior to the public hearing conducted pursuant to W.S. 35-12-110(f)(i);
(iii) The approval or rejection of the plans and specifications of the proposed dam or diversion system shall be binding on the industrial siting council for the purposes of issuing an industrial siting permit.
(d) The state engineer shall provide for the regulation and supervision of all dams, diversion systems and reservoirs by the state to the extent required to protect the public safety and property. The state engineer is authorized and directed to promulgate regulations and standards for the design, construction, enlargement, alteration, abandonment, maintenance, monitoring, operation, repair and removal of dams, reservoirs, and diversion systems as are necessary and proper to carry out the purposes of this act. The state engineer may waive any or all of the requirements of this act in instances where the dam or diversion system is located in a remote area where there is no threat to the public safety or property.