Flashing signals.

Checkout our iOS App for a better way to browser and research.

(a) Whenever an illuminated flashing red or yellow light is used in a traffic sign or signal it shall require obedience by vehicular traffic as follows:

1. Flashing red (stop signal). When a red lens is illuminated with rapid intermittent flashes, drivers of vehicles shall stop at a clearly marked stop line but, if none, before entering the crosswalk on the near side of the intersection or, if none, then at the point nearest the intersecting roadway where the driver has a view of approaching traffic on the intersecting roadway before entering the intersection and the right to proceed shall be subject to the rules applicable after making a stop at a stop sign.

2. Flashing yellow (caution signal). When a yellow lens is illuminated with rapid intermittent flashes, drivers of vehicles may proceed through the intersection or past such signal only with caution.

(b) This section shall not apply at railroad grade crossings. Conduct of drivers approaching grade crossings shall be governed by the rules set forth in Section 56-5-2710 of this chapter.

HISTORY: 1962 Code Section 46-309; 1952 Code Section 46-309; 1949 (46) 466; 1977 Act No. 149 Section 6.


Download our app to see the most-to-date content.