47A-15. Plans of building to be attached to declaration; recordation; certificate of architect or engineer.
(a) There shall be attached to the declaration, at the time it is filed for record, a full and exact copy of the plans of the building, which copy of plans shall be entered of record along with the declaration. Said plans shall show graphically all particulars of the building, including, but not limited to, the layout, location, ceiling and floor elevations, unit numbers and dimensions of the units, stating the name of the building or that it has no name, area and location of the common areas and facilities affording access to each unit, and such plans shall bear the verified statement of a registered architect or licensed professional engineer certifying that it is an accurate copy of portions of the plans of the building as filed with and approved by the municipal or other governmental subdivision having jurisdiction over the issuance of permits for the construction of buildings. If such plans do not include a verified statement by such architect or engineer that such plans fully and accurately depict the layout, location, ceiling and floor elevations, unit numbers and dimensions of the units, as built, there shall be recorded prior to the first conveyance of any unit an amendment to the declaration to which shall be attached a verified statement of a registered architect or licensed professional engineer certifying that the plans theretofore filed, or being filed simultaneously with such amendment, fully depict the layout, ceiling and floor elevations, unit numbers and dimensions of the units as built. Such plans shall be kept by the register of deeds in a separate file, indexed in the same manner as a conveyance entitled to record, numbered serially in the order of receipt, each designated "Unit Ownership," with the name of the building, if any, and each containing a reference to the book and page numbers and date of the recording of the declaration.
(b) In order to be recorded, plans filed for recording pursuant to subsection (a) shall:
(1) Be reproducible plans on cloth, linen, film or other permanent material and be submitted in that form; and
(2) Have an outside marginal size of not more than 21 inches by 30 inches nor less than eight and one-half inches by 11 inches, including one and one-half inches for binding on the left margin and a one-half inch border on each of the other sides. Where size of the buildings, or suitable scale to assure legibility require, plans may be placed on two or more sheets with appropriate match lines.
(c) The fee for recording each plan sheet submitted pursuant to subsection (a) shall be as prescribed by G.S. 161-10(a)(3).