52:27D-141.16 Use of unit concrete products that utilize carbon footprint-reducing technology.
2. a. A builder shall, for any new construction that requires the use of unit concrete products, where technically feasible, offer as an option unit concrete products that utilize carbon footprint-reducing technology in the new construction, whenever a prospective client enters into negotiations with the builder to construct or purchase a new residential dwelling or commercial building in the State.
The requirements of this section shall not apply whenever a prospective client enters into negotiations with a builder for new construction of an individual unit of condominiums as defined in the "Condominium Act," P.L.1969, c.257 (C.46:8B-1 et seq.) or attached single-family townhouses or row houses for which title to the individual condominium, townhouse, or row house unit will be held in fee simple but the maintenance, repair, or replacement of improvements constructed with unit concrete products are the responsibility of a non-profit homeowners association.
b. A builder shall disclose in writing pursuant to paragraph (3) of subsection c. of this section, in a form and manner as determined by the commissioner:
(1) that the prospective client may choose to use unit concrete products that utilize carbon footprint-reducing technology in the new construction;
(2) the total cost to be charged by the builder to the prospective client of using unit concrete products that utilize carbon footprint-reducing technology in the new construction;
(3) general information on the environmental and other benefits of using unit concrete products that utilize carbon footprint-reducing technology; and
(4) information concerning any applicable tax credits, rebates, or other incentives that may be available for the use of unit concrete products that utilize carbon footprint-reducing technology pursuant to P.L.2021, c.278 (C.52:27D-141.15 et al.).
c. The commissioner, in consultation with the Department of Environmental Protection, shall:
(1) publish educational materials to demonstrate how builders may incorporate unit concrete products that utilize carbon footprint-reducing technology into new construction;
(2) provide builders with information concerning applicable tax credits, rebates, or other incentives that may be available for the use of unit concrete products that utilize carbon footprint-reducing technology pursuant to P.L.2021, c.278 (C.52:27D-141.15 et al.) or any other law; and
(3) provide builders with a separate form that the builder shall present, along with the materials required pursuant to subsection b. and c. of this section, to the prospective client prior to entering into a contract, which form shall allow a prospective client to accept or decline the option to use unit concrete products that utilize carbon footprint-reducing technology in the new construction.
d. Notwithstanding the provisions of the "Administrative Procedure Act," P.L.1968, c.410 (C.52:14B-1 et seq.), to the contrary, the commissioner, in consultation with the Department of Environmental Protection, may adopt, immediately upon filing the proper notice with the Office of Administrative Law, rules and regulations that the commissioner determines to be necessary to implement this section. These rules and regulations shall be in effect for a period not to exceed 365 days after the date of the filing. The rules and regulations shall thereafter be amended, adopted, or readopted in accordance with the requirements of the "Administrative Procedure Act," P.L.1968, c.410 (C.52:14B-1 et seq.).
e. The commissioner shall enforce the provisions of this section and may penalize and assess violators of this section in accordance with the penalties and procedures provided for under section 18 of P.L.1977, c.419 (C.45:22A-38).
f. If a prospective client accepts, pursuant to a written contract, the builder's offer to use unit concrete products that utilize carbon footprint-reducing technology in the new construction, then the builder shall use unit concrete products that utilize carbon footprint-reducing technology subject to material availability or acts of force majeure, in which case the builder shall complete construction as soon as reasonably practical.
g. As used in this section:
"Advertising" means the same as the term is defined in section 3 of P.L.1977, c.419 (C.45:22A-23).
"Builder" means a person who constructs, or offers to construct, a new residential dwelling or commercial building in the State.
"Commissioner" means the Commissioner of Community Affairs.
"Prospective client" means a person who contemplates acquiring a legal or equitable interest in or constructing a new residential dwelling or commercial building.
"Unit concrete product" means a concrete building product that is fabricated under controlled conditions separate and remote from the intended point of use and is produced in a wet cast or dry cast method in a factory setting and then transported to the location of intended use for installation, including, but not limited to, all concrete pavers, whether permeable or non-permeable, and concrete block. "Unit concrete product" shall not include ready mix concrete, sand, stone, gravel, or bituminous concrete or asphalt.
"Unit concrete product that utilizes carbon footprint-reducing technology" means a unit concrete product that is certified by the Department of Environmental Protection, or any independent third party authorized by the department, pursuant to section 10 of P.L.2021, c.278 (C.52:27D-141.17), as generating at least 50 percent less carbon dioxide emissions in the production and utilization of the unit concrete product than conventional unit concrete products made with ordinary Portland cement. Such products shall also conform with the relevant requirements of the "State Uniform Construction Code Act," P.L.1975, c.217 (C.52:27D-119 et seq.) that incorporate by reference TMS 402/602 Building Code Requirements and Specification for Masonry Structures.
L. 2021, c.278, s.2.