(1) “Hazardous locations” mean those installations, glazed or to be glazed, in industrial, commercial and public buildings known as framed or unframed glass entrance doors; and those installations, glazed or to be glazed, in residential buildings and other structures used as dwellings, industrial buildings, commercial buildings and public buildings known as sliding glass doors, storm doors, shower doors, bathtub enclosures and fixed glazed panels adjacent to entrance and exit doors which because of their location present a barrier in the normal path traveled by persons going into or out of these buildings, and because of their size and design may be mistaken as means of ingress or egress; and any other installation, glazed or to be glazed, wherein the use of other than safety glazing materials would constitute an unreasonable hazard as the inspector of the county in which the construction is done may determine after notice and hearings as required by the county in which the construction is located, whether or not the glazing in such doors, panels, enclosures and other installations is transparent.

(2) “Safety glazing material” means any glazing material, such as tempered glass, laminated glass, wire glass or rigid plastic, which meets the test requirements of the current American National Standards Institute Standard Z-97.1 and such further requirements as may be adopted by the building inspector of the county in which the construction is done after notice and hearing as required by the county in which the construction is located, and which are so constructed, treated or combined with other materials as to minimize the likelihood of cutting and piercing injuries resulting from human contact with the glazing material.