When signals are inoperative or malfunctioning.

Checkout our iOS App for a better way to browser and research.

(1) (a) When a driver approaches an intersection and faces a traffic control signal that is inoperative, that remains on steady red or steady yellow during several time cycles, or that does not recognize a motorcycle that is operated by the driver, the provisions controlling entrance to a through street or highway from a stop sign or highway, as provided under section 42-4-703, apply until a police officer assumes control of traffic or until the traffic control signal resumes normal operation.

(b) If a traffic control signal at a place other than an intersection ceases to operate or malfunctions as specified in subsection (1)(a) of this section, drivers may proceed past the signal only with caution, as if the signal were flashing yellow.

  1. Whenever a pedestrian faces a pedestrian-control signal as provided in section 42-4802 which is inoperative or which remains on "Don't Walk" or "Wait" during several time cycles, such pedestrian shall not enter the roadway unless the pedestrian can do so safely and without interfering with any vehicular traffic.

  2. Any person who violates any provision of this section commits a class A trafficinfraction.

Source: L. 94: Entire title amended with relocations, p. 2346, § 1, effective January 1, 1995. L. 2019: (1) amended, (SB 19-144), ch. 126, p. 571, § 1, effective August 2.

Editor's note: This section is similar to former § 42-4-514 as it existed prior to 1994, and the former § 42-4-612 was relocated to § 42-4-1903.


Download our app to see the most-to-date content.