(1) A plat or map is a part of the declaration and is required for all common interest communities except cooperatives. A map is required only for a common interest community with units having a horizontal boundary. The requirements of this section shall be deemed satisfied so long as all of the information required by this section is contained in the declaration, a map or a plat, or some combination of any two or all of the three. Each plat or map must be clear and legible. When a map is required under any provision of this article, the map, a plat, or the declaration shall contain a certification that all information required by this section is contained in the declaration, the map or a plat, or some combination of any two or all of the three.
(2) In addition to meeting the requirements of a land survey plat as set forth in section 38-51-106, each map shall show the following, except to the extent such information is contained in the declaration or on a plat:
The name and a general schematic plan of the entire common interest community;
The location and dimensions of all real estate not subject to development rights, orsubject only to the development right to withdraw, and the location and dimensions of all existing improvements within that real estate;
A legally sufficient description, which may be of the whole common interest community or any portion thereof, of any real estate subject to development rights and a description of the rights applicable to such real estate;
The extent of any existing encroachments across any common interest communityboundary;
To the extent feasible, a legally sufficient description of all easements serving orburdening any portion of the common interest community;
The location and dimensions of the vertical boundaries of each unit and that unit'sidentifying number;
The location, with reference to established data, of the horizontal boundaries of eachunit and that unit's identifying number;
(g.5) Any units in which the declarant has reserved the right to create additional units or common elements, identified appropriately;
A legally sufficient description of any real estate in which the unit owners will ownonly an estate for years;
The distance between noncontiguous parcels of real estate comprising the commoninterest community; and
The approximate location and dimensions of limited common elements, includingporches, balconies, and patios, other than the limited common elements described in section 3833.3-202 (1)(b) and (1)(d).
(Deleted by amendment, L. 93, p. 648, § 12, effective April 30, 1993.)
(Deleted by amendment, L. 2007, p. 1799, § 1, effective July 1, 2007.)
Unless the declaration provides otherwise, the horizontal boundaries of any part of aunit located outside of a building have the same elevation as the horizontal boundaries of the inside part and need not be depicted on the plats and maps.
Upon exercising any development right, the declarant shall record an amendment tothe declaration with respect to that real estate reflecting change as a result of such exercise necessary to conform to the requirements of subsections (1), (2), and (4) of this section or new certifications of maps previously recorded if those maps otherwise conform to the requirements of subsections (1), (2), and (4) of this section.
Any certification of a map required by this article must be made by a registered landsurveyor.
The requirements of a plat or map under this article shall not be deemed to satisfyany subdivision platting requirement enacted by a county or municipality pursuant to section 3028-133, C.R.S., part 1 of article 23 of title 31, C.R.S., or a similar provision of a home rule city, nor shall the plat or map requirements under this article be deemed to be incorporated into any subdivision platting requirements enacted by a county or municipality.
Any plat or map that was recorded on or after July 1, 1998, but prior to July 1, 2007,and that satisfies the requirements of this section in effect on July 1, 2007, is deemed to have satisfied the requirements of this section at the time it was recorded.
Source: L. 91: Entire article added, p. 1721, § 1, effective July 1, 1992. L. 93: (2)(a), (2)(f), (2)(g), (3), and (4)(b) amended, p. 648, § 12, effective April 30. L. 94: IP(2) amended, p. 1510, § 45, effective July 1. L. 97: IP(2) amended, p. 151, § 3, effective March 28. L. 98: (1), IP(2), (6), and (7) amended, p. 480, § 6, effective July 1. L. 2007: (1), (2), and (4) amended and (9) added, p. 1799, § 1, effective July 1.