(1) An applicant may qualify for licensing as a professional engineer by endorsement if the applicant satisfies the requirements of the occupational credential portability program.
(2) (a) An applicant may qualify for licensing as a professional engineer by graduation, experience, and examination if the applicant passes the principles and practice of engineering examination.
(b) In order to be admitted to the examination pursuant to subsection (2)(a) of this section, the applicant must:
(I) (A) Have graduated from a board-approved engineering curriculum of four or more years; and
Have eight years of progressive engineering experience, of which educational studymay be a part; and
Have been enrolled as an engineer-intern in this state; or
(II) (A) Have graduated from a board-approved engineering technology curriculum of four or more years; and
Have ten years of progressive engineering experience, of which educational studymay be a part; and
Have been enrolled as an engineer-intern in this state; or
(III) (A) Have graduated from an engineering curriculum of four or more years not approved by the board or from a related science curriculum of four or more years; and
Have ten years of progressive engineering experience, of which educational studymay be a part; and
Have been enrolled as an engineer-intern in this state; or
(IV) (A) Have graduated from an engineering curriculum of four or more years or from a related science curriculum of four or more years; and
(B) Have twenty years of progressive engineering experience, of which educational study may be a part.
(c) Upon passing the examination and the submission of evidence of experience satisfactory to the board, the applicant shall be licensed as a professional engineer if the applicant is otherwise qualified pursuant to section 12-120-212.
(3) (a) An applicant may qualify for licensing as a professional engineer by experience and examination if the applicant passes the principles and practice of engineering examination.
(b) In order to be admitted to the examination pursuant to subsection (3)(a) of this section, the applicant must:
Have twelve years of progressive engineering experience, of which educational studymay be a part; and
Have been enrolled as an engineer-intern in this state.
(c) Upon passing the examination and the submission of evidence of experience satisfactory to the board, the applicant shall be licensed as a professional engineer if the applicant is otherwise qualified pursuant to section 12-120-212.
(4) (a) A professional engineer who has been duly licensed to practice engineering in this state and who is over sixty-five years of age, upon application, may be classified as a retired professional engineer. Individuals who are so classified shall lose their licensure, shall not practice engineering, and shall pay a fee to retain retired professional engineer status.
(b) (I) A retired professional engineer shall be reinstated to the status of a professional engineer upon payment of the renewal fee. No other fee shall be assessed against the retired professional engineer as a penalty.
(II) For any professional engineer who has been retired for two or more years, the board may require reexamination unless the board is satisfied of the retired professional engineer's continued competence.
Source: L. 2019: Entire title R&RE with relocations, (HB 19-1172), ch. 136, p. 887, § 1, effective October 1. L. 2020: (1) amended, (HB 20-1326), ch. 126, p. 533, § 12, effective June 25.
Editor's note: (1) This section is similar to former § 12-25-114 as it existed prior to 2019.
(2) Section 47(1)(b) of chapter 126 (HB 20-1326), Session Laws of Colorado 2020, provides that the act changing this section applies to conduct occurring on or after June 25, 2020.
Cross references: For the short title ("Red Tape Reduction Act") and the legislative declaration in HB 20-1326, see sections 1 and 2 of chapter 126, Session Laws of Colorado 2020.