On and after January 1, 2010, each applicant for licensure as a registered dental assistant in extended functions shall successfully complete an examination consisting of the procedures described in subdivisions (a) and (b). On and after January 1, 2010, each person who holds a current and active registered dental assistant in extended functions license issued prior to January 1, 2010, who wishes to perform the duties specified in paragraphs (1), (2), (5), and (7) to (11), inclusive, of subdivision (b) of Section 1753.5, shall successfully complete an examination consisting of the procedures described in subdivision (b). The specific procedures shall be assigned by the board, after considering recommendations of its Dental Assisting Council, and shall be graded by examiners appointed by the board. Each applicant shall furnish the required materials necessary to complete the examination.
(a) Successful completion of the following two procedures on a patient provided by the applicant. The prepared tooth, prior to preparation, shall have had mesial and distal contact. The preparation performed shall have margins at or below the free gingival crest and shall be one of the following: 7/8 crown, 3/4 crown, or full crown, including porcelain fused to metal. Alginate impression materials alone shall not be acceptable:
(1) Cord retraction of gingiva for impression procedures.
(2) Take a final impression for a permanent indirect restoration.
(b) Successful completion of two of the following procedures on a simulated patient head mounted in appropriate position and accommodating an articulated typodont in an enclosed intraoral environment, or mounted on a dental chair in a dental operatory:
(1) Place, condense, and carve an amalgam restoration.
(2) Place and contour a nonmetallic direct restoration.
(3) Polish and contour an existing amalgam restoration.
(Amended by Stats. 2011, Ch. 385, Sec. 16. (SB 540) Effective January 1, 2012.)