(a) Definition. Materials formulated for use in the cleanup and bioremediation of oil and chemical spills, the disposal of liquid materials, or the prevention of leakage or leaching in maintenance applications, shop floors, and fuel storage areas.
(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 89 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.
(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased sorbents. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased sorbents.
(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Sorbents. USDA is requesting that manufacturers of these qualifying biobased products provide information on the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated sorbents and which product should be afforded the preference in purchasing.
Sorbents within this designated item can be made with recycled materials. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated sorbents containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.17. EPA provides recovered materials content recommendations for sorbents in the Recovered Materials Advisory Notice (RMAN) published for these products. The RMAN recommendations can be found by accessing EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.
[73 FR 27953, May 14, 2008]