Tests required for the certification of each IBC design type are specified in the following table. The letter X indicates that one IBC (except where noted) of each design type must be subjected to the tests in the order presented:
Performance test | IBC type | |||||
---|---|---|---|---|---|---|
Metal IBCs | Rigid plastic IBCs | Composite IBCs | Fiber-board IBCs | Wooden IBCs | Flexible IBCs | |
Vibration | 6 X | 6 X | 6 X | 6 X | 6 X | 1.5 X |
Bottom lift | 2 X | X | X | X | X | |
Top lift | 2 X | 2 X | 2 X | 2 5 X | ||
Stacking | 7 X | 7 X | 7 X | 7 X | 7 X | 5 X |
Leakproofness | 3 X | 3 X | 3 X | |||
Hydrostatic | 3 X | 3 X | 3 X | |||
Drop | 4 X | 4 X | 4 X | 4 X | 4 X | 5 X |
Topple | 5 X | |||||
Righting | 2 5 X | |||||
Tear | 5 X |
[Amdt. 178-108, 60 FR 40039, Aug. 4, 1995, as amended at 64 FR 51919, Sept. 27, 1999; 66 FR 45386, 45390, Aug. 28, 2001]