(a) Specifications. The following specification and standard, of the issue in effect on the date the plastic foam material is manufactured, form a part of this subpart:
(1) Military specification:
MIL-F-859 - Fuel Oil, Boiler.
(2) Federal specification:
C-C-91 - Candle illuminating.
(3) Federal standard:
Standard 601 - Rubber: Sampling and Testing.
(4) ASTM
D4986-98, Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials.
(b) Copies on file. Copies of the specifications and standards referred to in this section shall be kept on file by the plastic foam manufacturer with this subpart.
(1) The Federal Specification and the Federal Standard may be purchased from the General Services Administration, Federal Acquisition Service, Office of the FAS Commissioner, 2200 Crystal Drive, 11th Floor, Arlington, VA 22202; telephone 703-605-5400.
(2) The Military Specification may be obtained from the Military Specifications and Standards, Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, https://assist.daps.dla.mil/quicksearch/.
(3) The A.S.T.M. Standard may be purchased from the American Society for Testing Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
[CGFR 65-37, 30 FR 11593, Sept. 10, 1965, as amended by CGFR 65-64, 31 FR 563, Jan. 18, 1966; USCG-1999-5151, 64 FR 67186, Dec. 1, 1999; USCG-2013-0671, 78 FR 60162, Sept. 30, 2013]