Procedures for Testing Performance Characteristics of Class II Equivalent Methods for PM <sub>2.5</sub>

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Air Programs
  6. Ambient Air Monitoring Reference and Equivalent Methods
  7. Procedures for Testing Performance Characteristics of Class II Equivalent Methods for PM <sub>2.5</sub>

Checkout our iOS App for a better way to browser and research.

Section
53.60

General provisions.

Section
53.61

Test conditions.

Section
53.62

Test procedure: Full wind tunnel test.

Section
53.63

Test procedure: Wind tunnel inlet aspiration test.

Section
53.64

Test procedure: Static fractionator test.

Section
53.65

Test procedure: Loading test.

Appendix
Table F-1 to Subpart F of Part 53

Performance Specifications for PM <sub>2.5</sub> Class II Equivalent Samplers

Appendix
Table F-2 to Subpart F of Part 53

Particle Sizes and Wind Speeds for Full Wind Tunnel Test, Wind Tunnel Inlet Aspiration Test, and Static Chamber Test

Appendix
Table F-3 to Subpart F of Part 53

Critical Parameters of Idealized Ambient Particle Size Distributions

Appendix
Table F-4 to Subpart F of Part 53

Estimated Mass Concentration Measurement of PM <sub>2.5</sub> for Idealized Coarse Aerosol Size Distribution

Appendix
Table F-5 to Subpart F of Part 53

Estimated Mass Concentration Measurement of PM <sub>2.5</sub> for Idealized &#x201C;Typical&#x201D; Coarse Aerosol Size Distribution

Appendix
Table F-6 to Subpart F of Part 53

Estimated Mass Concentration Measurement of PM <sub>2.5</sub> for Idealized Fine Aerosol Size Distribution

Appendix
Figure F-1 to Subpart F of Part 53

Designation Testing Checklist

Appendix
Appendix A to Subpart F of Part 53

References

Section
53.66

Test procedure: Volatility test.