(i) Protection in the workplace. Requirements as specified in § 721.63 (a)(1), (a)(2)(i), (a)(3) and (4), when determining which persons are reasonably likely to be exposed as required for § 721.63(a)(1) and (4), engineering control measures (e.g., enclosure or confinement of the operation, general and local ventilation) or administrative control measures (e.g., workplace policies and procedures) shall be considered and implemented to prevent exposure, where feasible, (a)(5)(respirators must provide a National Institute for Occupational Safety and Health (NIOSH) assigned protection factor (APF) of at least 10), (a)(6) (particulate), (a)(6)(v) and (vi), (b) (concentration set at 1.0%), and (c).

(ii) Hazard communication. Requirements as specified in § 721.72(a) through (e) (concentration set at 1.0%), (f), (g)(1)(i), (ii), and (vi), (g)(2)(i), (ii), (iii), (iv), and (v), (g)(3)(i) and (ii), (g)(4)(i), and (g)(5). Alternative hazard and warning statements that meet the criteria of the Globally Harmonized System (GHS) and OSHA Hazard Communication Standard may be used.

(iii) Industrial, commercial, and consumer activities. Requirements as specified in § 721.80(f) and (k)(import of the substance at or below the maximum concentration specified in the corresponding TSCA section 5(e) Order).

(iv) Release to water. Requirements as specified in § 721.90(a)(4), (b)(4), and (c)(4) where N=14.