Owners and operators of affected sources shall comply with each applicable reporting provision in this section.
(a) Initial notification. Each affected source shall submit an initial notification in accordance with § 63.9(b).
(b) Application for approval of construction or reconstruction. Each owner or operator shall submit an application for approval of construction or reconstruction in accordance with the provisions of § 63.5(d).
(c) Notification of compliance status. Each affected source shall submit a notification of compliance status report no later than 180 days after the compliance date. For slabstock affected sources, this report shall contain the information listed in paragraphs (c)(1) through (3) of this section, as applicable. This report shall contain the information listed in paragraph (c)(4) of this section for molded foam processes and in paragraph (c)(5) of this section for rebond foam processes.
(1) A list of diisocyanate storage vessels, along with a record of the type of control utilized for each storage vessel.
(2) For transfer pumps in diisocyanate service, a record of the type of control utilized for each transfer pump.
(3) A statement that the slabstock foam affected source is in compliance with §§ 63.1297 and 63.1298, or a statement that slabstock foam processes at an affected source are in compliance with §§ 63.1297 and 63.1298.
(d) Semiannual reports. Each slabstock affected source shall submit a report containing the information specified in paragraphs (d)(1) through (3) of this section semiannually no later than 60 days after the end of each 180 day period. The first report shall be submitted no later than 240 days after the date that the Notification of Compliance Status is due and shall cover the 6-month period beginning on the date that the Notification of Compliance Status Report is due.
(1) For sources complying with the storage vessel provisions of § 63.1294(a) using a carbon adsorption system, unloading events that occurred after breakthrough was detected and before the carbon was replaced.
(2) Any equipment leaks that were not repaired in accordance with §§ 63.1294(b)(2)(iii) and 63.1294(c).
(3) Any leaks in vapor return lines that were not repaired in accordance with § 63.1294(a)(1)(ii).
(e) Annual compliance certifications. Each affected source subject to the provisions in §§ 63.1293 through 63.1301 shall submit a compliance certification annually.
(1) The compliance certification shall be based on information consistent with that contained in § 63.1308, as applicable.
(2) A compliance certification required pursuant to a state or local operating permit program may be used to satisfy the requirements of this section, provided that the compliance certification is based on information consistent with that contained in § 63.1308, and provided that the Administrator has approved the state or local operating permit program under part 70 of this chapter.
(3) Each compliance certification submitted pursuant to this section shall be signed by a responsible official of the company that owns or operates the affected source.
(f) Malfunction reports. If a source fails to meet an applicable standard, slabstock affected sources shall report such events in the next semiannual report and molded and rebond affected sources shall report such events in the next annual compliance certification. Report the number of failures to meet an applicable standard. For each instance, report the date, time and duration of each failure. For each failure, the report shall include a list of the affected sources or equipment, an estimate of the volume of each regulated pollutant emitted over any emission limit, and a description of the method used to estimate the emissions.
(g) Within 60 days after the date of completing each performance test (as defined in § 63.2) required by this subpart, you shall submit the results of the performance tests, including any associated fuel analyses, following the procedure specified in either paragraph (g)(1) or (g)(2) of this section.
(1) For data collected using test methods supported by the EPA's Electronic Reporting Tool (ERT) as listed on the EPA's ERT Web site (http://www.epa.gov/ttn/chief/ert/index.html),, the owner or operator shall submit the results of the performance test to the EPA via the Compliance and Emissions Data Reporting Interface (CEDRI), (CEDRI can be accessed through the EPA's Central Data Exchange (CDX) (http://cdx.epa.gov/epa_home.asp). Performance test data shall be submitted in a file format generated through the use of the EPA's ERT. Alternatively, the owner or operator may submit performance test data in an electronic file format consistent with the extensible markup language (XML) schema listed on the EPA's ERT Web site, once the XML schema is available. Owners or operators, who claim that some of the information being submitted for performance tests is confidential business information (CBI), shall submit a complete file generated through the use of the EPA's ERT or an alternate electronic file consistent with the XML schema listed on the EPA's ERT Web site, including information claimed to be CBI, on a compact disk, flash drive or other commonly used electronic storage media to the EPA. The electronic media shall be clearly marked as CBI and mailed to U.S. EPA/OAQPS/CORE CBI Office, Attention: WebFIRE Administrator, MD C404-02, 4930 Old Page Rd., Durham, NC 27703. The same ERT or alternate file with the CBI omitted shall be submitted to the EPA via the EPA's CDX as described earlier in this paragraph.
(2) For data collected using test methods that are not supported by the EPA's ERT as listed on the EPA's ERT Web site, the owner or operator shall submit the results of the performance test to the Administrator at the appropriate address listed in § 63.13.
[63 FR 53996, Oct. 7, 1998, as amended at 79 FR 48088, Aug. 15, 2014]