How do I demonstrate initial compliance with the emission limitations and establish the operating limits?

1. Law
2. CFR 40
3. Protection of Environment
4. Environmental Protection Agency
5. Air Programs
6. Standards of Performance for New Stationary Sources
7. Standards of Performance for Other Solid Waste Incineration Units for Which Construction is Commenced After December 9, 2004, or for Which Modification or Reconstruction is Commenced on or After June 16, 2006
8. Initial Compliance Requirements
9. How do I demonstrate initial compliance with the emission limitations and establish the operating limits?

§ 60.2927 How do I demonstrate initial compliance with the emission limitations and establish the operating limits?

You must conduct an initial performance test, as required under § 60.8, to determine compliance with the emission limitations in table 1 of this subpart and to establish operating limits using the procedure in § 60.2916 or § 60.2917. The initial performance test must be conducted using the test methods listed in table 1 of this subpart and the procedures in § 60.2922.

Download our app to see the most-to-date content.