Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. The Pulp, Paper, and Paperboard Point Source Category
  7. Papergrade Sulfite Subcategory
  8. Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).

Checkout our iOS App for a better way to browser and research.

§ 430.52 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).

(a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):

Expand Table

Subpart E

[Bisulfite liquor/surface condensers; BPT effluent limitations for papergrade sulfite facilities where blow pit washing techniques are used]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 31.8 16.55 9.30
TSS 43.95 23.65 12.99
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Expand Table

Subpart E

[Bisulfite liquor/barometric condensers; BPT effluent limitations for papergrade sulfite facilities where blow pit washing techniques are used]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 34.7 18.05 10.14
TSS 52.2 28.1 15.44
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Expand Table

Subpart E

[Acid sulfite liquor/surface condensers; BPT effluent limitations for papergrade sulfite facilities where blow pit washing techniques are used]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 32.3 16.8 9.44
TSS 43.95 23.65 12.99
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Expand Table

Subpart E

[Acid sulfite liquor/barometric condensers; BPT effluent limitations for papergrade sulfite facilities where blow pit washing techniques are used]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 35.55 18.5 10.39
TSS 52.2 28.1 15.44
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Expand Table

Subpart E

[Bisulfite liquor/surface condensers; BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 26.7 13.9 7.81
TSS 43.95 23.65 12.99
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Note: Limitations above do not apply to mills using continuous digesters.

Expand Table

Subpart E

[Bisulfite liquor/barometric condensers; BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 29.4 15.3 8.60
TSS 52.2 28.1 15.44
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Note: Limitations above do not apply to mills using continuous digesters.

Expand Table

Subpart E

[Acid sulfite liquor/surface condensers; BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 29.75 15.5 8.71
TSS 43.95 23.65 12.99
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Note: Limitations above do not apply to mills using continuous digesters.

Expand Table

Subpart E

[Acid sulfite liquor/barometric condensers; BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 32.5 16.9 9.49
TSS 52.2 28.1 15.44
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Note: Limitations above do not apply to mills using continuous digesters.

Expand Table

Subpart E

[Continuous digesters; BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 38.15 19.85 11.15
TSS 53.75 28.95 15.91
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, resulting from the use of wet barking operations, which may be discharged by a point source subject to the provisions of this subpart. These limitations are in addition to the limitations set forth in paragraph (a) of this section and shall be calculated using the proportion of the mill's total production due to use of logs which are subject to such operations:

Expand Table

Subpart E

[BPT effluent limitations for papergrade sulfite facilities where blow pit washing techniques are used]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 2.7 1.45 0.80
TSS 7.5 3.95 2.19
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Expand Table

Subpart E

[BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 3.05 1.6 0.90
TSS 7.5 3.95 2.19
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

(c) The following limitations establish the quantity or quality of pollutants or pollutant parameters, controlled by this section, resulting from the use of log washing or chip washing operations, which may be discharged by a point source subject to the provisions of this subpart. These limitations are in addition to the limitations set forth in paragraph (a) of this section and shall be calculated using the proportion of the mill's total production due to use of logs and/or chips which are subject to such operations:

Expand Table

Subpart E

[BPT effluent limitations for papergrade sulfite facilities where blow pit washing techniques are used]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 0.15 0.1 0.05
TSS 2.55 1.35 0.75
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Expand Table

Subpart E

[BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 0.35 0.2 0.1
TSS 2.55 1.35 0.75
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

(d) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, resulting from the use of log flumes or log ponds, which may be discharged by a point source subject to the provisions of this subpart. These limitations are in addition to the limitations set forth in paragraph (a) of this section and shall be calculated using the proportion of the mill's total production due to use of logs which are subject to such operations:

Expand Table

Subpart E

[BPT effluent limitations for papergrade sulfite facilities where blow pit washing techniques are used]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 0.35 0.2 0.1
TSS 1.7 0.9 0.5
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.

Expand Table

Subpart E

[BPT effluent limitations for papergrade sulfite facilities where vacuum or pressure drums are used to wash pulp]

Pollutant or pollutant property Kg/kkg (or pounds per 1,000 lb) of
product
Continuous dischargers Non-continuous dischargers (annual
average)
Maximum for any 1 day Average of daily values for 30 consecutive days
BOD5 0.7 0.35 0.2
TSS 1.70 0.9 0.5
pH (1) (1) (1)

1 Within the range of 5.0 to 9.0 at all times.


Download our app to see the most-to-date content.