Standards of performance for new sources.

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. Rubber Manufacturing Point Source Category
  7. Pan, Dry Digestion, and Mechanical Reclaimed Rubber Subcategory
  8. Standards of performance for new sources.

Checkout our iOS App for a better way to browser and research.

§ 428.95 Standards of performance for new sources.

(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of product)
Oil and grease 0.40 0.144
TSS 0.384 0.192
pH (1) (1)
English units (lb/1,000 lb of product)
Oil and grease 0.40 0.144
TSS 0.384 0.192
pH (1) (1)

1 Within the range 6.0 to 9.0.

(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed rubber process, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.95:

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of product)
COD 6.7 2.8
English units (lb/1,000 lb of product)
COD 6.7 2.8


Download our app to see the most-to-date content.