Pretreatment standards for new sources.

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. Rubber Manufacturing Point Source Category
  7. Wet Digestion Reclaimed Rubber Subcategory
  8. Pretreatment standards for new sources.

Checkout our iOS App for a better way to browser and research.

§ 428.86 Pretreatment standards for new sources.

Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart:

Expand Table
Pollutant or pollutant property Pretreatment standards
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of product)
COD 14.7 6.11
Oil and grease (1) (1)
TSS (2) (2)
pH (2) (2)
English units (lb/1,000 lb of product)
COD 14.7 6.11
Oil and grease (1) (1)
TSS (2) (2)
pH (2) (2)

1 100 mg/l.

2 No limitation.

[40 FR 2341, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995]


Download our app to see the most-to-date content.