Standards of performance for new sources.

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. Rubber Manufacturing Point Source Category
  7. Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory
  8. Standards of performance for new sources.

Checkout our iOS App for a better way to browser and research.

§ 428.75 Standards of performance for new sources.

(a) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart:

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of raw material)
Oil and grease 0.26 0.093
TSS 0.50 0.25
pH (1) (1)
English units (lb/1,000 lb of raw material)
Oil and grease 0.26 0.093
TSS 0.50 0.25
pH (1) (1)

1 Within the range 6.0 to 9.0.

(b) The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to lead-sheathed hose production, which may be discharged by a new source subject to the provisions of this subpart, in addition to the limitations set forth by § 428.75(a):

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of raw material)
Lead 0.0017 0.0007
English units (lb/1,000 lb of raw material)
Lead 0.0017 0.0007


Download our app to see the most-to-date content.