Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. Rubber Manufacturing Point Source Category
  7. Medium-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory
  8. Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

Checkout our iOS App for a better way to browser and research.

§ 428.63 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

(a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable:

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of raw material)
Oil and grease 0.42 0.15
TSS 0.80 0.40
pH (1) (1)
English units (lb/1,000 lb of raw material)
Oil and grease 0.42 0.15
TSS 0.80 0.40
pH (1) (1)

1 Within the range 6.0 to 9.0.

(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to lead-sheathed hose production, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by § 428.63(a):

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of raw material)
Lead 0.0017 0.0007
English units (lb/1,000 lb of raw material)
Lead 0.0017 0.0007

(c) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, and attributable to wet scrubbers, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable, in addition to the limitations set forth by § 428.63:

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of raw material equivalent)
TSS 1.0 0.5
English units (lb/1,000 lb of raw material equivalent)
TSS 1.0 0.5


Download our app to see the most-to-date content.