Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. Asbestos Manufacturing Point Source Category
  7. Solvent Recovery Subcategory
  8. Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.

Checkout our iOS App for a better way to browser and research.

§ 427.97 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.

The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best conventional pollutant control technology.

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (kg/kkg of finished asbestos products)
TSS 0.18 0.09
pH (1) (1)
English units (lb/1,000 lb of finished asbestos products)
TSS 0.18 0.09
pH (1) (1)

1 Within the range 6.0 to 9.0.

[44 FR 50747, Aug. 29, 1979]


Download our app to see the most-to-date content.