Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. Glass Manufacturing Point Source Category
  7. Television Picture Tube Envelope Manufacturing Subcategory
  8. Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

Checkout our iOS App for a better way to browser and research.

§ 426.113 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best available technology economically achievable. These limitations are applicable to the abrasive polishing and acid polishing waste water streams.

Expand Table
Effluent characteristic Effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days shall not exceed -
Metric units (g/kkg of furnace pull)
Fluoride 120.0 60.0
Lead 0.9 0.45
English units (lb/1,000 lb of furnace pull)
Fluoride 0.12 0.06
Lead 0.0009 0.00045

[44 FR 50747, Aug. 29, 1979]


Download our app to see the most-to-date content.