Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional technology (BCT).

  1. Law
  2. CFR 40
  3. Protection of Environment
  4. Environmental Protection Agency
  5. Effluent Guidelines and Standards
  6. Iron and Steel Manufacturing Point Source Category
  7. Hot Forming Subcategory
  8. Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional technology (BCT).

Checkout our iOS App for a better way to browser and research.

§ 420.77 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional technology (BCT).

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional technology.

(a) Primary mills, carbon and specialty -

(1) Without scarfing.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.150 0.0561
O&G 0.0374
pH (1) (1)

1 Within the range of 6.0 to 9.0.

(2) With scarfing.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.221 0.0830
O&G 0.0553
pH (1) (1)

1 Within the range of 6.0 to 9.0.

(b) Section mills -

(1) Carbon.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.357 0.134
O&G 0.0894
pH (1) (1)

1 Within the range of 6.0 to 9.0.

(2) Specialty.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.224 0.0841
O&G 0.0561
pH (1) (1)

1 Within the range of 6.0 to 9.0.

(c) Flat mills -

(1) Hot strip and sheet mills, carbon and specialty.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.427 0.160
O&G 0.107
pH (1) (1)

1 Within the range of 6.0 to 9.0.

(2) Carbon plate mills.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.227 0.0851
O&G 0.0568
pH (1) (1)

1 Within the range of 6.0 to 9.0.

(3) Specialty plate mills.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.100 0.0376
O&G 0.0250
pH (1) (1)

1 Within the range of 6.0 to 9.0.

(d) Pipe and tube mills, carbon and specialty.

Expand Table

Subpart G

Pollutant or pollutant property BCT effluent limitations
Maximum for any 1 day Average of daily values for 30 consecutive days
Kg/kkg (pounds per 1,000 lb) of product
TSS 0.212 0.0795
O&G 0.0530
pH (1) (1)

1 Within the range of 6.0 to 9.0.

[47 FR 23284, May 27, 1982, as amended at 47 FR 41739, Sept. 22, 1982]


Download our app to see the most-to-date content.