(a) Application.
(1) This section applies to any motor vehicle used to transport employees, materials, or property at worksites engaged in shipyard employment. This section does not apply to motor vehicle operation on public streets and highways.
(2) The requirements of this section apply to employer-provided motor vehicles. The requirements of paragraphs (b)(2), (b)(4), and (c)(2) of this section also apply to employee-provided motor vehicles.
(3) Only the requirements of paragraphs (b)(1) through (b)(3) apply to powered industrial trucks, as defined in § 1910.178. The maintenance, inspection, operation, and training requirements in 29 CFR 1910.178 continue to apply to powered industrial trucks used for shipyard employment.
(b) Motor vehicle safety equipment.
(1) The employer shall ensure that each motor vehicle acquired or initially used after August 1, 2011 is equipped with a safety belt for each employee operating or riding in the motor vehicle. This requirement does not apply to any motor vehicle that was not equipped with safety belts at the time of manufacture.
(2) The employer shall ensure that each employee uses a safety belt, securely and tightly fastened, at all times while operating or riding in a motor vehicle.
(3) The employer shall ensure that vehicle safety equipment is not removed from any employer-provided vehicle. The employer shall replace safety equipment that is removed.
(4) The employer shall ensure that each motor vehicle used to transport an employee has firmly secured seats for each employee being transported and that all employees being transported are using such seats.
(c) Motor vehicle maintenance and operation.
(1) The employer shall ensure that each motor vehicle is maintained in a serviceable and safe operating condition, and removed from service if it is not in such condition.
(2) The employer shall ensure that, before a motor vehicle is operated, any tools and materials being transported are secured if their movements may create a hazard for employees.
(3) The employer shall implement measures to ensure that motor vehicle operators are able to see, and avoid harming, pedestrians and bicyclists at shipyards. Measures that employers may implement to comply with this requirement include:
(i) Establishing dedicated travel lanes for motor vehicles, bicyclists, and pedestrians;
(ii) Installing crosswalks and traffic control devices such as stop signs, mirrors at blind spots, or physical barriers to separate travel lanes;
(iii) Establishing appropriate speed limits for all motor vehicles;
(iv) Establishing “no drive” times to allow for safe movement of pedestrians;
(v) Providing reflective vests or other gear so pedestrians and bicyclists are clearly visible to motor vehicle operators;
(vi) Ensuring that bicycles have reflectors, lights, or other equipment to maximize visibility of the bicyclist; or
(vii) Other measures that the employer can demonstrate are as effective in protecting pedestrians and bicyclists as those measures specified in paragraphs (c)(3)(i) through (c)(3)(vi) of this section.